DP_S/build/lib/mysql/mysql-test/t/sp-dynamic.test

delimiter |;

--disable_warnings
drop procedure if exists p1|
drop procedure if exists p2|
--enable_warnings

###################################################################### 
# Test Dynamic SQL in stored procedures. #############################
###################################################################### 
#
# A. Basics
#
create procedure p1()
begin
  prepare stmt from "select 1";
  execute stmt;
  execute stmt;
  execute stmt;
  deallocate prepare stmt;
end|
call p1()|
call p1()|
call p1()|
drop procedure p1|
#
# B. Recursion. Recusion is disabled in SP, and recursive use of PS is not
# possible as well.
#
create procedure p1()
begin
  execute stmt;
end|
prepare stmt from "call p1()"|
# Allow SP resursion to be show that it has not influence here
set @SAVE_SP_RECURSION_LEVELS=@@max_sp_recursion_depth|
set @@max_sp_recursion_depth=100|
--error ER_PS_NO_RECURSION
execute stmt|
--error ER_PS_NO_RECURSION
execute stmt|
--error ER_PS_NO_RECURSION
execute stmt|
--error ER_PS_NO_RECURSION 
call p1()|
--error ER_PS_NO_RECURSION 
call p1()|
--error ER_PS_NO_RECURSION
call p1()|
set @@max_sp_recursion_depth=@SAVE_SP_RECURSION_LEVELS|
--error ER_SP_RECURSION_LIMIT 
call p1()|
--error ER_SP_RECURSION_LIMIT
call p1()|
--error ER_SP_RECURSION_LIMIT
call p1()|

drop procedure p1|
#
# C. Create/drop a stored procedure in Dynamic SQL.
# One cannot create stored procedure from a stored procedure because of
# the way MySQL SP cache works: it's important that this limitation is not
# possible to circumvent by means of Dynamic SQL.
#
create procedure p1()
begin
  prepare stmt from "create procedure p2() begin select 1; end";
  execute stmt;
  deallocate prepare stmt;
end|
--error ER_UNSUPPORTED_PS
call p1()|
--error ER_UNSUPPORTED_PS
call p1()|
drop procedure p1|
create procedure p1()
begin
  prepare stmt from "drop procedure p2";
  execute stmt;
  deallocate prepare stmt;
end|
--error ER_UNSUPPORTED_PS
call p1()|
--error ER_UNSUPPORTED_PS
call p1()|
drop procedure p1|
#
# D. Create/Drop/Alter a table (a DDL that issues a commit) in Dynamic SQL.
# (should work ok).
#
create procedure p1()
begin
  prepare stmt_drop from "drop table if exists t1";
  execute stmt_drop;
  prepare stmt from "create table t1 (a int)";
  execute stmt;
  insert into t1 (a) values (1);
  select * from t1;
  prepare stmt_alter from "alter table t1 add (b int)";
  execute stmt_alter;
  insert into t1 (a,b) values (2,1);
  deallocate prepare stmt_alter;
  deallocate prepare stmt;
  deallocate prepare stmt_drop;
end|
call p1()|
call p1()|
drop procedure p1|
#
# A more real example (a case similar to submitted by 24/7).
#
create procedure p1()
begin
  set @tab_name=concat("tab_", replace(curdate(), '-', '_'));
  set @drop_sql=concat("drop table if exists ", @tab_name);
  set @create_sql=concat("create table ", @tab_name, " (a int)");
  set @insert_sql=concat("insert into ", @tab_name, " values (1), (2), (3)");
  set @select_sql=concat("select * from ", @tab_name); 
  select @tab_name;
  select @drop_sql;
  select @create_sql;
  select @insert_sql;
  select @select_sql;
  prepare stmt_drop from @drop_sql;
  execute stmt_drop;
  prepare stmt from @create_sql;
  execute stmt;
  prepare stmt from @insert_sql;
  execute stmt;
  prepare stmt from @select_sql;
  execute stmt;
  execute stmt_drop;
  deallocate prepare stmt;
  deallocate prepare stmt_drop;
end|
--disable_result_log
call p1()|
call p1()|
--enable_result_log
drop procedure p1|
#
# E. Calling a stored procedure with Dynamic SQL
# from a stored function (currently disabled).
# 
create procedure p1()
begin
  prepare stmt_drop from "drop table if exists t1";
  execute stmt_drop;
  prepare stmt from "create table t1 (a int)";
  execute stmt;
  deallocate prepare stmt;
  deallocate prepare stmt_drop;
end|
--disable_warnings
drop function if exists f1|
--enable_warnings
create function f1(a int) returns int
begin
  call p1();
  return 1;
end|

# Every stored procedure that contains Dynamic SQL is marked as
# such. Stored procedures that contain Dynamic SQL are not
# allowed in a stored function or trigger, and here we get the
# corresponding error message.

--error ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG 
select f1(0)|
--error ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG 
select f1(f1(0))|
--error ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG 
select f1(f1(f1(0)))|
drop function f1|
drop procedure p1|
#
# F. Rollback and cleanup lists management in Dynamic SQL.
#
create procedure p1()
begin
  drop table if exists t1;
  create table t1 (id integer not null primary key,
                   name varchar(20) not null);
  insert into t1 (id, name) values (1, 'aaa'), (2, 'bbb'), (3, 'ccc');
  prepare stmt from "select name from t1";
  execute stmt;
  select name from t1;
  execute stmt;
  prepare stmt from
    "select name from t1 where name=(select name from t1 where id=2)";
  execute stmt;
  select name from t1 where name=(select name from t1 where id=2);
  execute stmt;
end|
call p1()|
call p1()|
drop procedure p1|
#
# H. Executing a statement prepared externally in SP.
#
prepare stmt from "select * from t1"|
create procedure p1()
begin
  execute stmt;
  deallocate prepare stmt;
end|
call p1()|
--error ER_UNKNOWN_STMT_HANDLER
call p1()|
drop procedure p1|
#
# I. Use of an SP variable in Dynamic SQL is not possible and
# this limitation is necessary for correct binary logging: prepared
# statements do not substitute SP variables with their values for binlog, so
# SP variables must be not accessible in Dynamic SQL.
#
create procedure p1()
begin
  declare a char(10);
  set a="sp-variable";
  set @a="mysql-variable";
  prepare stmt from "select 'dynamic sql:', @a, a";
  execute stmt;
end|
--error ER_BAD_FIELD_ERROR 
call p1()|
--error ER_BAD_FIELD_ERROR
call p1()|
drop procedure p1|
#
# J. Use of placeholders in Dynamic SQL.
# 
create procedure p1()
begin
  prepare stmt from 'select ? as a';
  execute stmt using @a;
end|
set @a=1|
call p1()|
call p1()|
drop procedure p1|
#
# K. Use of continue handlers with Dynamic SQL.
#
drop table if exists t1|
drop table if exists t2|
create table t1 (id integer primary key auto_increment,
                 stmt_text char(35), status varchar(20))|
insert into t1 (stmt_text) values
  ("select 1"), ("flush tables"), ("handler t1 open as ha"), 
  ("analyze table t1"), ("check table t1"), ("checksum table t1"),
  ("check table t1"), ("optimize table t1"), ("repair table t1"),
  ("describe extended select * from t1"),
  ("help help"), ("show databases"), ("show tables"),
  ("show table status"), ("show open tables"), ("show storage engines"),
  ("insert into t1 (id) values (1)"), ("update t1 set status=''"),
  ("delete from t1"), ("truncate t1"), ("call p1()"), ("foo bar"),
  ("create view v1 as select 1"), ("alter view v1 as select 2"),
  ("drop view v1"),("create table t2 (a int)"),("alter table t2 add (b int)"),
  ("drop table t2")|
create procedure p1()
begin
  declare v_stmt_text varchar(255);
  declare v_id integer;
  declare done int default 0;
  declare c cursor for select id, stmt_text from t1;
  declare continue handler for 1295 -- ER_UNSUPPORTED_PS
    set @status='not supported';
  declare continue handler for 1064 -- ER_SYNTAX_ERROR
    set @status='syntax error';
  declare continue handler for sqlstate '02000' set done = 1;

  prepare update_stmt from "update t1 set status=? where id=?";
  open c;
  repeat
    if not done then
      fetch c into v_id, v_stmt_text;
      set @id=v_id, @stmt_text=v_stmt_text;
      set @status="supported";
      prepare stmt from @stmt_text;
      execute update_stmt using @status, @id;
    end if;
  until done end repeat;
  deallocate prepare update_stmt;
end|
call p1()|
select * from t1|
drop procedure p1|
drop table t1|
#
# Bug#7115 "Prepared Statements: packet error if execution within stored
# procedure".
#
prepare stmt from 'select 1'| 
create procedure p1() execute stmt|
call p1()|
call p1()|
drop procedure p1|
#
# Bug#10975 "Prepared statements: crash if function deallocates"
# Check that a prepared statement that is currently in use 
# can't be deallocated.
#
# a) Prepared statements and stored procedure cache:
#
# TODO: add when the corresponding bug (Bug #12093 "SP not found on second
# PS execution if another thread drops other SP in between") is fixed.
#
# b) attempt to deallocate a prepared statement that is being executed
--error ER_STMT_NOT_ALLOWED_IN_SF_OR_TRG 
create function f1() returns int
begin
  deallocate prepare stmt;
  return 1;
end|

# b)-2 a crash (#1) spotted by Sergey Petrunia during code review
create procedure p1()
begin
  prepare stmt from 'select 1 A';
  execute stmt;
end|
prepare stmt from 'call p1()'|
--error ER_PS_NO_RECURSION 
execute stmt|
--error ER_PS_NO_RECURSION 
execute stmt|
drop procedure p1|

#
# Bug#10605 "Stored procedure with multiple SQL prepared statements
# disconnects client"
#
--disable_warnings
drop table if exists t1, t2|
--enable_warnings
create procedure p1 (a int) language sql deterministic
begin
  declare rsql varchar(100);
  drop table if exists t1, t2;
  set @rsql= "create table t1 (a int)";
  select @rsql;
  prepare pst from @rsql;
  execute pst;
  set @rsql= null;
  set @rsql= "create table t2 (a int)";
  select @rsql;
  prepare pst from @rsql;
  execute pst;
  drop table if exists t1, t2;
end|
set @a:=0|
call p1(@a)|
select @a|
call p1(@a)|
select @a|
drop procedure if exists p1|

# End of the test
delimiter ;|